top of page




Suitable for laying porcelain stoneware and low absorption pieces.

Application, both in a thin layer and in a thick layer (up to 15 mm).

Excellent performance in:
– Swimming pools and other supports under immersion. – On deformable plate supports

laminated plaster.

High humidification. High impregnation power, both in the support and in the ceramic.

perfect thixotropy. Zero vertical slip.


Fields of application


Flexible cementitious adhesive, suitable for laying all types of ceramic tiles and natural and/or reconstituted stones:

· Porcelain stoneware and ceramic pieces without absorption. · Ceramics with absorption.
· Cooked clay.
· Glassy mosaic.

· Ceramic coatings for swimming pools.
· Reconstituted natural and artificial stones. · Marble, granite, limestone, etc.


How to use


1_Previous recommendations

  • ·  During installation, avoid the penetration of water between the support and the piece and provide final protection.
  • ·  With large format tiles, it is advisable to apply a double glue.
  • ·  To avoid the appearance of eyebrows, it is advisable to use uniform thicknesses of adhesive.
  • ·  It is advisable to respect joints between pieces of 3 mm indoors and 5 mm outdoors.
  • ·  Depending on the format of the tile to be laid, the use of different trowels is recommended, as shown in the table:

Suitable for laying ceramic tiles with a porosity greater than 0.5% water absorption, in interior flooring and wall tiles and exterior flooring and baseboards, as well as for laying low-absorption ceramic tiles on interior and exterior floors and walls. interiors, for domestic use, on supports of:

· Cement plaster.
· Cementitious screeds.
· Prefabricated concrete or poured on site. · Deformable gypsum plasterboards.
· Concrete blocks.

· Plaster, plaster, anhydrite, pearlescent plaster and others of a similar nature (prior primer with GECOL PRIMER – TP).


    bottom of page